Download Datasheets TC534 Device 
Download datasheets and other technical documentation for microcontrollers - download datasheets and technical documentation for microcontrollers

PICmicro Microcontrollers
PICmicro flexible microcontroller solutions provide results!

Analog & Interface Products
A broad spectrum of analog products with a focus on power management, thermal management, linear and mixed-signal solutions

KEELOQ Authentication Products
KEELOQ is a patented code-hopping technology

Memory Products
A broadest selections of memory devices on the market for embedded control applications

microID RFID Products
Radio Frequency Identification Tags (RFID)
rfPIC Microcontrollers
New UHF radio frequency 8-bit microcontrollers

Home - Analog & Interface Products - Mixed Signal Devices - Dual Slope - TC534 Device, download datasheet

Download Datasheets TC534 Device

The TC530/534 are serial analog data acquisition subsystems ideal for high precision measurements (up to 17bits plus sign). The TC530 consists of a dual slope integrating A/D converter, negative power supply generator and 3 wire serial interface port. The TC534 is identical to the TC530, but adds a four channel differential input multiplexer. Key A/D converter operating parameters (Auto Zero and Integration time) are programmable, allowing the user to trade-off conversion time for resolution. Data conversion is initiated when the RESET input is brought low. After conversion, data is loaded into the output shift register and EOC is asserted indicating new data is available. The converted data (plus Overrange and polarity bits) is held in the output shift register until read by the processor, or until the next conversion is completed allowing the user to access data at any time. The TC530/534 timebase can be derived from an external crystal of 2 MHz (max), or from an external frequency source. The TC530/534 requires a single 5V power supply and features a 5V, 10mA output which can be used to supply negative bias to other components in the system.

Datasheet and Other Documentation

Detailed Content

Lit. Number



TC530/4 Datasheet


Download TC530/4 Datasheet


In Production

Specification Chart

Supply Voltage (V)

Input Voltage Range (V)


Sampling Rate (Conv/s)

Input Channels

Data Interface

4.5 to 5.5

V SS +1.5V to V DD -1.5V

Up to 17 bits

3 to 10


Serial port

Additional Features

Precision (up to 17 Bits) A/D Converter
3 Wire Serial Port
Flexible: User Can Trade-Off Conversion Speed Against Resolution
Single Supply Operation
5V Output Pin
4 Input, Differential Analog MUX (TC534)
Automatic Input Polarity and Overrange Detection
Low Operating Current 5mA Max
Wide Analog Input Range 4.2V Max

Package Options

1 Bumped Wafer on Frame(WFB), 1 330pF COB(3C), 2008-2015 - download datasheets